The best way to deal with clogged pipes in the toilet is to turn off the flow of water immediately when a pipe problem arises. Then, use solid metal or suction to catch and open the path that is clogged with garbage. Aside from that, check out more info about destape de drenaje as well.
Toilets that emit water due to clogged drains
To overcome this problem, first, you need to clog the drainage channel in the toilet and empty the water tank. Next, remove the damaged blockage to clean it with vinegar, soap, and detergent. Then, plug it back in, as usual, open the drying channel that clogs the toilet.
Toilets that drain water to the bathroom floor
First of all, you need to close the drain valve into the tank, use a dry cloth to absorb water in the toilet. Then, move parts such as tank caps, toilet seat covers, water containers, and be careful not to contact points. Then, clean or replace with a new one if needed.
The toilet removes water from the water storage tank
If the toilet leaks from the tank, all you have to do is move the rubber parts to do the cleaning. Then, attach and tighten, and if you have trouble releasing it, you can replace this part with more affordable rubber in the stores.
The toilet leaked from the handle and water reservoir
The cause of this problem is the arrangement of the water flow installed is too high compared to the regulation, causing the water source to the water reservoir does not fit to accommodate excess water. The treatment you can give is to check the water limit according to the product standards offline.
Condensing clogged drain pipes
When you experience this one problem, first check the sewer, whether there are cracked parts or not. In the case of a drain pipe, check the outside of the drain pipe from the hot part outside, whether it is clogged or blocked by the drain. You can also test the tube, suction or blow it to allow dust or lumps of water to escape the blockage is present.